Courses
If you don't see a course available or a time that fits your needs, please contact us and we will gladly accommodate you.
-
24 Hour Hazwoper
This course is designed to reflect the training requirements for employees working on-site only occasionally for a specific limited task, and who are unlikely to be exposed over permissible exposur...
-
Amine Regeneration
This course is designed to provide the fundamentals and analysis of amine treating. Participants will partake in operational discussions regarding best operating practices for amine treating.
-
24/40 Hour Hazwoper Refresher
The Hazardous Waste Operations and Emergency Response (HAZWOPER) standard, 29 CFR 1910.120, training requirements, covers individuals who are exposed or may be exposed to hazardous chemicals during...
-
Basic Production Technology
This course is designed to provide a basic understanding of the oil and gas production operations as applied to the offshore oil and gas industry.
-
Continuous Gas Lift
This course is designed to cover the principles of oil and gas well production and equip employees with the knowledge to obtain the necessary skills to achieve optimal efficiency in gas lifting ope...
-
8 Hour Hazwoper
This course is designed to reflect the training requirements for employees working on-site that are exposed or potentially exposed to hazardous substances, health hazards, or safety hazards.
-
Glycol Dehydration
This course is designed to explain the use of tri-ethylene glycol to dehydrate natural gas. Participants will be able to identify and describe the function and operating parameters of each componen...
-
Principles of Gas & Oil Measurements
This course is designed to cover the basics of gas and oil metering and will focus on Lease Automatic Custody Transfer (250.1202). System design principles, equipment function, and seal requirement...
-
Air Monitoring
This course is designed to provide information and instruction on the proper use of gas detectors and air monitoring systems. Participants will learn about the methods used to detect hazardous gas ...
-
PSST T-2 Basic
This three day course is designed to provide basic knowledge and skills required to understand, manage, test, and document the process systems that are used in the Oil & Gas Industry. It will cover...
-
Benzene Awareness
This course is designed to provide awareness level training on the hazards of benzene in the workplace. Participants will be shown various types of respirators that would be required to be worn if ...
-
PSST 1 Day T-2/Refresher
This course is designed to be refresher course in providing basic knowledge and skills required to understand, manage, test, and document the process systems that are used in the Oil & Gas Industry...
-
Confined Space Entry
This course provides information about hazards of confined spaces, how to control these hazards, and what requirements apply when employees enter confined spaces.
-
Reciprocating Gas Compression
This course is designed to explain what compression is, how it is accomplished, and the various needs for it. Participants will be taught rod load calculations and also partake in an exercise invol...
-
Crane Operator
This course is designed for all persons required to maintain and operate cranes. This course satisfies requirements IAW API RP 2D - 7th Edition and API SPEC 2C.
-
Defensive Driving
This course is designed to familiarize students of the hazards while driving, and to ensure the safety of all employees driving light and medium duty vehicles.
-
DOT HM 126
This course is designed to help identify and properly label and package all hazardous materials for safe transportation. Anyone who handles, transports, packages, or manifests hazardous materials m...
-
Electrical Safety NFPA 70E
This course is designed to familiarize employees working with and/or around electrical equipment (panels, breakers, cords, wires, etc.) both energized and non-energized, and provide general electri...
-
Fall Protection User/Rescue
This course is designed to allow participants the capability of identifying fall hazards in the workplace and taking the corrective measures to eliminate them throughout the selection, installation...
-
Forklift
This course is designed for employees that are required to operate a forklift in the course of their duties in an industrial or construction setting. This course will help employees in learning to ...
-
H2S Safety
This course is designed to address H2S, its toxic properties, and the precautions necessary to ensure health and safety when working around it. Any individual working around sour crude oil and gas ...
-
Incipient Firefighting/Fire Watch
This course is designed to familiarize students with the general principles of fire extinguisher use and the hazards involved with incipient stage firefighting. Workers need to understand how fires...
-
JSA
This course is designed to instruct participants on how to properly and effectively develop a safe work plan that is reflective of identifying each step and task required to complete a specific job...
-
Lockout/Tagout
This course is designed to reflect the importance of LO/TO as an energy isolation program intended to protect the safety of maintenance personnel from the accidental startup of release of energy wh...
-
MFA/CPR/AED/BBP
This course is designed to teach participants the proper use of adult medic first aid basic (MFA), cardiopulmonary resuscitation (CPR), an automated external defibrillator (AED), and bloodborne pat...
-
Norm Awareness
This course is designed to provide awareness level information and safety measures for all personnel working around naturally occurring radioactive material (NORM). It will also cover awareness lev...
-
Norm Surveyor
This course is designed to provide information and safety measures for all personnel working around naturally occurring radioactive material (NORM). It will also cover information about equipment t...
-
PEC Orientation 7.0
This course is the most widely used safety orientation in the U.S. onshore and offshore E&P Industry. Accredited by both SafeGulf and SafeLandUSA, this one-day safety orientation aslo meets 30CFR 2...
-
Respirator Fit Testing
A “fit test” tests the seal between the respirator's facepiece and your face. It takes about fifteen to twenty minutes to complete and is performed at least annually. After passing a fit test with...
-
Rigger
This course is designed for all persons involved in attaching or detaching lifting equipment to loads and using hoists, as well as those qualifying as crane operators.This course satisfies requirem...
-
Swing Rope Instruction & Personnel Transfer
This course is designed to teach participants proper swing rope instruction and personnel transfer. It will cover when to transfer and how to do so safely.
-
OSHA Refresher
Occupational Safety and Health Administration (OSHA) training courses are essential for creating a safe and healthy working environment. This course is designed to educate employers and employees ...
